World-Watching: USDA GAIN Reports from 19 August 2025

[from the United States Department of Agriculture, Foreign Agricultural Service: Global Agricultural Information Network (GAIN)]

Australia: Stone Fruit Annual

Stone fruit production in Australia is forecast to decline in marketing year (MY) 2025/26, primarily due to the Bureau of Meteorology’s (BOM) projection of a wetter-than-average spring. If realized, these conditions are expected to negatively affect both yields and fruit quality. Cherry production is forecast to fall by ten percent, while peach and nectarine production is expected to drop by seven percent. Growing conditions to date have been favorable, with excellent winter chill hours supporting strong bud burst and production potential. However, the anticipated shift to wet spring weather is likely to undermine these early-season advantages. As a result, cherry exports are forecast to decrease by nine percent and peach and nectarine exports by seven percent. Imports, though starting from a low base, are projected to rise modestly in MY 2025/26.

Read the full article [archived PDF]

Chile: Stone Fruit Annual

Post projects exports of Chilean cherries to grow significantly in the coming years, driven by strong international demand, particularly from China. Post estimates cherry production in marketing year (MY) 2024/25 to reach 730,000 metric tons (MT), a 6.7 increase over MY 2024/25. Chilean cherry exports will increase by 7.2 percent reaching 670,000 MT. In MY 2024/25, Post estimates nectarine and peach production to total 205,000 MT, a 3.4 percent increase over MY 2024/25. Peach and nectarine exports will increase by 3.4 percent totaling 146,000 metric tons. This growth reflects the continued expansion of nectarine planting, which offsets the decline in fresh peach area planted.

Read the full article [archived PDF]

China: Call for Domestic Comments on 30 National Food Safety Standards

On August 1, 2025, the Chinese government announced a public comment period for 30 national food safety standards, open until September 26, 2025, via the national standards management system. The standards have not yet been notified to the WTO. This report includes an unofficial translation of the announcement and the list of standards, and stakeholders are advised to review the regulations for potential market or regulatory impacts.

Read the full article [archived PDF]

China: New CCP Regulation Expands Anti-Corruption and Frugality Measures

On May 18, 2025, the Chinese Communist Party and State Council issued a revised regulation on “Strict Economy and Opposing Waste by Party and Government Organs.” The regulation bans drinking alcohol at public receptions and events and discourages other forms of consumption that could be seen as extravagant. The FAS China offices are monitoring the potential impact on high-value U.S. agricultural products.

Read the full article [archived PDF]

China: Revised National Food Safety Standard for Paddy Rice Notified

On July 25, 2025, China notified a National Food Safety Standard for Paddy Rice to the WTO under G/TBT/N/CHN/2091. This national food safety standard includes mandatory requirements for quality, testing, inspection, packaging, and labeling of domestic and imported commercial paddy rice. This report provides an unofficial translation of the notified standard. Comments may be submitted to the China’s TBT National Notification and Enquiry Center at tbt@customs.gov.cn until August 24, 2025.

Read the full article [archived PDF]

Guatemala: Retail Foods Annual

Guatemala boasts a young population with a median age of 26 years and a growing middle class, driving increased demand for modern retail formats. However, traditional markets and informal retail remain prevalent across the country. In 2024, the United States exported $1.9 billion in agricultural and related products to Guatemala, with $886 million attributed to consumer-oriented goods. Key export categories included red meats, poultry, dairy products, fresh fruits, and processed vegetables.

Read the full article [archived PDF]

India: Cotton and Products Update

FAS Mumbai estimates MY 2025/26 India cotton production at 24.5 million 480-lb bales from 11.2 million hectares, down two percent from the previous estimate as farmers shift to higher-return crops like paddy, pulses, and cereals; kharif sowing decreased 2.4 percent from last year (as of August 1). An eight percent increase in the minimum support price (MSP) for medium- and long-staple cotton, effective October 1, is pushing fiber prices higher, encouraging mills to increase imports. Mill consumption is forecast at 25.7 million 480-lb bales, supported by steady yarn and apparel demand in key export markets and a potential export surge following ratification of the U.K.-India Comprehensive Economic and Trade Agreement (CETA).

Read the full article [archived PDF]

Japan: Stone Fruit Annual

Japan’s fresh cherry production for the 2025/26 marketing year (MY) is projected to be 12,500 tons. This forecast is a result of production losses caused by high temperatures during the pollination period in the country’s largest cherry-producing region. While this represents an 8.7 percent increase compared to the previous year’s historically poor harvest, it is expected to be a low yield year with a 25 percent decrease from the average production year. Due to the poor domestic production, demand for U.S. cherries is expected to remain strong for the 2025/26 MY, continuing the trend from the previous year. For peach production in Japan, the absolute number of fruits is anticipated to be equivalent to the previous year; however, the total production volume by weight is forecasted to decrease by approximately 10 percent because of high temperatures and low rainfall during the critical fruit growing period.

Read the full article [archived PDF]

Nicaragua: Nicaragua Peanut Report Annual

Nicaragua’s peanut farmers are expected to reduce harvested areas by at least five percent in marketing year (MY) 2025/26 in anticipation of lower prices due to increased Brazilian peanut production. FAS Managua expects farmers to be more rigorous in selecting production areas based on historical yields in MY 2025/26, excluding marginal lands with less fertile soil. Even with fluctuating market prices and adjustments to planted areas, Nicaragua is expected to remain a stable peanut producer in the region, with exports of shelled peanuts exceeding 70,000 metric tons annually.

Read the full article [archived PDF]

For more information, or for an archive of all FAS GAIN reports, please visit gain.fas.usda.gov.

Economics-Watching: Why Businesses Say Tariffs Have a Delayed Effect on Inflation

[from the Federal Reserve Bank of Richmond, 8 August, 2025]

by R. Andrew BauerRenee Haltom and Matthew Martin

Regional Matters

Ever since new tariffs were enacted in early 2025, a key policy question has been what is the extent to which businesses will pass tariff costs through to prices, and when? The effects of a tariff are rarely straightforward, given, among other things, competitive dynamics and the challenges of implementation, but the historically large and changing nature of these tariffs have created additional levels of uncertainty over the effects.

In uncertain times, anecdotal evidence from businesses can be especially insightful. We are learning how businesses are reacting to tariffs through the Richmond Fed’s business surveys as well as through hundreds of one-on-one conversations with Fifth District businesses since the start of 2025.

These conversations showcase that navigating tariffs is a complex and sometimes protracted process for firms, particularly when there is uncertainty. Firms describe several reasons they may not have experienced the full impact of proposed tariffs yet (even when goods and countries they deal with are subject to them), as well as reasons that even when they have incurred tariff-related cost increases, there can be a delayed impact on pricing decisions.

Reasons Firms May Not Have Incurred Tariffs Yet

Business contacts describe several strategies or circumstances that can delay or reduce the tariffs on inputs or other imported items. These include the following:

As our monthly business surveys have found, many firms report deploying more than one strategy to delay tariffs. Notably, many of these delays are only temporary.

Reasons Tariffs May Have a Delayed Impact on Prices

Even when firms have incurred tariffs, they give several reasons why tariffs may not be immediately reflected in the prices they charge for their products. These include the following:

  • Waiting for tariff policy to clarify. Higher prices could reduce demand for goods and services and/or lead firms to lose market share, so many firms said they are hesitant to increase prices until they’re sure tariffs will remain in place. For example, a large national retailer said if tariffs are finalized at a sufficiently low level, they’ll absorb what they’ve incurred to date, but if high tariffs stick, they’ll have to raise prices. A steel fabricator for industrial equipment described being reluctant to raise prices on the 10 percent cost increases they’d seen thus far but would have to raise prices should the increases reach 12 to 13 percent. A grocery store chain was reluctant to raise prices and instead might reduce margins, which had recovered in recent years, to maintain their customer base. Some firms explicitly noted a strategy to both raise prices over time and pursue efficiency gains to cut costs and completely restore margins within a year or two.
  • Elasticity testing. Firms reported testing across goods whether consumers will accept price increases. A furniture manufacturer said he’s seen competitors pass along just 5 percentage points of the tariffs at a time so it isn’t such a huge shock to customers, though in that sector, “We all end in the same place which is the customer bearing most of it.” A national retailer said most firms are doing a version of stair-stepping tariffs through, e.g., raising prices a small amount once or twice to see if consumer demand holds, and if so, trying again two months later. This retailer said prices were going up very marginally in early summer, would increase more in July and August, and would be up by 3 to 5 percent by the end of Q4 and into 2026. Another national retailer said they would start testing the extent to which demand falls with price increases, e.g., when the first items that were subject to tariffs—in this case back to school items—hit shelves in late July.
  • Blind margin. Some firms reported attempting to pass through cost in less noticeable ways. While any price increase to consumers will be captured in measures of aggregate inflation, the fact that price increases may occur on non-tariffed goods might make it difficult to directly relate price increases to tariffs. An outdoor goods retailer said, “Unless it’s a branded item where everyone knows the price, if something goes for $18, it can also go for $19.” A national retailer plans to print new shelf labels with updated pricing, which will be less noticeable for consumers compared to multiple new price stickers layered on top. This takes time (akin to a textbook “menu cost” in economics), so it will not be reflected in prices until July and August. A grocery store said their goal was to increase average prices across the store but focus on less visible prices.
  • Selling out of preexisting inventory: Many firms noted they still have production inventory from before tariffs were announced, so they do not need to raise prices as long as they still sell these lower cost goods. A national retailer noted they have at least 25 weeks of inventory on hand for most imported products. A firm that produces grocery items said they will decide how much to raise prices as they get closer to selling tariff-affected products. Similarly, retailers order seasonal items quarters in advance. Many were receiving items for fall and winter when the new tariffs were going into effect in the spring. They paid the tariff then, but we won’t see the price increase until those items hit the shelves in the fall or winter. One retailer speculated that seasonal décor items will look the most like a one-time increase.
  • Pre-established prices. Many firms face infrequent pricing due to factors like annual contracts or pre-sales. For example, a dealer of farm equipment gets half its sales through incentivized pre-sales to lock in demand and smooth around crop cycles. They noted that while it would be difficult to retroactively ask those customers to pay for part of the tariff, they will pass tariffs directly through on spare parts. A steel fabricator for industrial equipment has a contract for steel through Q3, so they haven’t been impacted yet by price increases. However, they will face new costs once that contract expires.

In general, compared to small firms, large firms have more ability to negotiate with vendors, temporarily absorb costs, burn cash, wait for strategic opportunity, and test things out. This matters because large firms often lead pricing behavior among firms, so these strategic choices may influence the response of inflation to tariffs more generally. Even within firm size, one often hears that negotiations on price vary considerably by relationship and item.

Conclusion

A key question surrounding tariffs is whether any effects on inflation will resemble a short-lived price increase—as in the simplest textbook model of tariffs—or a more sustained increase to inflation that may warrant tighter Fed monetary policy. When asked in May what will determine the answer, Fed Chair Jerome Powell cited three factors [archived PDF]: 1) the size of the tariff effects; 2) how long it takes to work their way through to prices; and 3) whether inflation expectations remain anchored. The insights shared above suggest the process from proposed tariffs to the prices set by firms is far from instantaneous or clear-cut, particularly when tariff policy is changing.

Sensing from businesses suggests that the impact of tariffs on their price-setting [archived PDF] has been lagged, but it is starting to play out. Nonetheless, it remains highly uncertain how tariffs will impact consumer inflation. The discussion above makes clear that firms are nimble and innovative in the face of challenge, and they are concerned about losing customers in the current environment, particularly consumer-facing firms. We will continue to learn from our business contacts and share their insights.


Views expressed are those of the author(s) and do not necessarily reflect those of the Federal Reserve Bank of Richmond or the Federal Reserve System.

Economics-Watching: From Code to Cash: How Programmable Payments Are Shaping the Future of Finance

[from the Federal Reserve Bank of Atlanta, by Chris Colson, payments expert]

When I was first introduced to computers, programming languages like COBOL, Fortran, and Pascal were standard. None of them were particularly user-friendly, especially for someone like me who isn’t a natural coder. Over time, new languages and tools appeared, making programming more accessible.

Today, we have low-code and no-code platforms [related YouTube video] that allow people with little to no coding experience to build apps. Just as programming has become easier, payments are becoming programmable, offering automation, simplicity, and flexibility.

Programmable payments are automated transactions that occur when specific conditions or events are met. Unlike traditional payment methods, which can rely on manual approvals or fixed schedules (think monthly software transactions), programmable payments offer a more dynamic approach. For instance, a programmable payment might only occur when a product is delivered or a service is completed.

Two key technologies power programmable payments: smart contracts and application programming interfaces (APIs). Smart contracts are self-executing digital agreements that run on blockchain and automatically release payments once specified conditions are met. APIs allow different systems to communicate, which enables the automation of payment processes across platforms. For example, a business might set up an API process that triggers a payment and then marks the invoice as “paid” in its accounting software.

The biggest advantage of programmable payments is automation. By automating transactions, businesses can eliminate repetitive tasks like payroll or vendor payments, reducing the time spent on manual processes while also minimizing the risk of human error. Automation can also help businesses save money, as they may no longer need intermediaries like banks or payment processors to facilitate transactions. Blockchain-based smart contracts can bypass the need for banks to verify payments, resulting in faster, cheaper transactions.

Transparency and security are other significant advantages, particularly when programmable payments are powered by blockchain. Each transaction is recorded on a decentralized ledger, providing a clear, auditable trail of activity. This can help reduce the risk of fraud and create a more secure system for managing payments.

The potential of programmable payments goes beyond automating individual transactions. For supply chain management, payments that are automatically triggered upon delivery of goods can reduce the need for manual verification, and thus improve operational efficiency. In decentralized finance, programmable payments can streamline processes like loan repayments and insurance payouts, improving speed and transparency.

As the Internet of Things expands, integrating programmable payments could allow devices to handle payments autonomously. Imagine a car that automatically pays for tolls or parking, or a smart refrigerator that orders and pays for groceries when supplies run low. The possibilities for real-time, automated payments between connected devices are enormous.

Despite all the potential, programmable payments face challenges. The technology—particularly blockchain-based systems—can be complex and requires specialized expertise, which can increase upfront costs for businesses. In addition, the regulatory environment around programmable payments is still evolving, especially for cross-border transactions. This creates uncertainty for businesses.

Much like low-code and no-code platforms make app development accessible to non-coders, programmable payments are moving toward a future with minimal human intervention. Both are about simplifying complex systems: low-code/no-code platforms hide the complexity of software development, while programmable payments automate financial processes with predefined logic.

Both point to a future where systems execute tasks on their own, based on rules set by users. The goal is simple: Once the conditions are established, the system handles the rest.

Programmable payments are reshaping the future of finance. It’s an exciting future that promises smarter and more streamlined and efficient financial operations.

World Watching: U.S.-China Tariffs

(from the PIIE Insider)

News and Analysis from the Peterson Institute for International Economics
November 13, 2019

They Saved the Worst for Last: Why Trump’s Impending December Tariffs on China Should Be Rolled Back

The terms and deadlines of President Donald Trump’s trade war with China are hard to follow, but one thing is clear: American consumers and businesses should welcome a rollback of impending final rounds of China tariffs as part of a possible “phase 1” deal to be announced later in November, say Mary E. Lovely and Yang Liang. Washington has acted against China to punish it for preventing US access to the Chinese market and for violating US intellectual property rights.  Beijing is reportedly demanding that impending December tariffs be dropped before they sign any deal. Trump says he hasn’t decided how many tariffs might be lifted.

Key Takeaways

Read the full story at PIIE [archived PDF].